At present, the main production process of artificial turf is roughly divided into the following nine steps: raw materials - dyeing - extrusion drawing - silk merging - tufting - gluing - drying - finished product inspection - packaging into the warehouse The first step in the production of artificial turf is to adjust the masterbatch to the desired color in a certain proportion and process it into grass filament with a wire drawing machine. The produced grass filament is then hung in a fixed position, and the grass filament is driven into the corresponding pipe through an air gun, and then it is threaded into the corresponding pinhole to weave the grass silk on the base cloth. Then adjust the machine according to the customer's requirements for grass wire length, grass wire density and so on. Then the tufting, that is, weaving grass, is woven on the base cloth like a carpet, and after tufting, it is a semi-finished lawn. Glue coating is to apply thick glue to the back of the lawn to fix the grass filament and enhance the use time of the lawn. Then is drying, is also one of the most important steps in artificial turf, artificial turf into the oven, the back glue is facing up, the temperature of the backing is controlled at about 120 degrees, the temperature of artificial turf grass filament is controlled at about 60-80 degrees, can not be high, at this temperature artificial turf will automatically untwist, in this process the grass filament of the artificial turf will be restored by a single root of each filament. After all the above steps are completed, the quality inspector will inspect the finished product, and the qualified finished product will be packaged into storage. The above is the production process of artificial turf, is it not as complicated as imagined?
